|
Model LT2000-SP Laser Distance
Measurement Meter
|
LT2000-SP
Laser Distance Measurement
Sensor
-
Visible class II
laser providing precise distance measurement
-
Operates off natural surfaces up to 30 meters (98 feet), off a white
target at 100 meters (328) and off a special reflector target at 150 meters
(492 feet)
-
Measuring rate as low as 100 msec. off a white surface
-
Provides +/- 2mm to +/- 5mm accuracy
-
RS232 or RS422 Serial Interface
-
Programmable 4 - 20mA Analog Output
-
Programmable Digital Output & Offset
-
External Trigger Input
-
IP66 Glass Fiber Reinforced Polyester Enclosure Weather Resistant -
Corrosion Proof
Typical Applications
| Product Material |
Length, width, level and
position of product. |
| Material
Handling |
Automated
storage/retrieval systems and positioning of mobile equipment. |
| Crane
Control |
Positioning of cranes & crane
trolleys. |
| Collision
Avoidance |
Distance alarm between vehicles
using reflective target. |
The LT2000-SP Laser Distance Meter
operates over a substantial range off static or passing product in
difficult areas in harsh environments. The LT2000-SP measures distances
over a working range up to 30 meters off of natural surfaces, up to
100 meters off of white surfaces and up to 150 meters off of a special
reflector. For operation with automated positioning control of material
handling transport systems a white reflective target is used or the
special reflector is used.
Especially suited for precise detection and measurement of cold/hot
product at temperatures up to 600°C. For higher product temperature a
Model LT2000-HT is available for measurement of cold/hot product at
product temperatures up to 1200°C (2192°F) .
Straightforward alignment is easily accomplished via the visible red
laser measuring beam.
|
Accuracy is +/- 2mm to +/- 5mm according to ambient
temperature and surface reflectivity. Repeatability is +/- 0.5mm and the
user scalable resolution is 0.1mm.
The zero offset and the span of the 4 - 20mA analog output are both user
programmable. The distance offset is also user programmable, this allows
the user to define a zero point independent of the analog output zero
offset.
Provided with a user programmable digital switching output which is
triggered by exceeding in the positive or negative direction a user
programmable distance threshold. The hysteresis of the digital switching
output is also programmable.
The LT2000-SP is a robust Laser Distance Meter and is provided in a NEMA
4 - IP65 fiber reinforced polyester weather resistant corrosion proof
enclosure. Standard operating temperature range 50°C.
The LT2000-SP Laser Distance Meter provides a highly accurate
measurement reading. It is ideal for length, thickness, depth and height
position determination.
Supplied as standard with either a RS232 or RS422/RS485 serial
interface with a 2400 to 38,400 Baud Rate & a programmable 4 - 20mA 16
BIT analog output. An optional ProfiBus DP Gateway Interface Box is
available. ProfiBus DP, DeviceNet and Ethernet Interface Options will
soon be available. |
